Suredrive Handheld Automatic Screw Driver Head By Carlson Engineering Designed To Work With A Screwfeeder & Toolstand

Automatic Screwdriving and
Screwfeeding System

Site Map

1-909-599-8087


SureDRIVE Handheld Automatic Screw Driver Head Carlson Engineering’s SureDRIVE automatic screwdriving head is designed to work with a screwfeeder. It will automate your screwdriving process by automatically driving the screw into your product. The SureDRIVE head can be setup to drive screws to torque. The SureDRIVE is one of the most advanced handheld drive heads available. It can be fitted with almost any brand of screwdriver on the market.

Key Features
10 Nm torque capacity Small size and weight Simple design with long life Works well for left or right handed operators Operator push down travel is less than 1/8 of a inch. Non adjustable - which reduces product maintenance Ergonomic - very little push down force required by operator 3 bit stroke lengths available 1.625, 2.250, and 4.25 inches of travel Self advancing bit lifts jaws off of part greatly reducing scuffing In many cases a standard 3.5 inch long power bit can be used Easy bit change - simply unthread the jaw assembly and the bit is exposed The SureDRIVE will adapt to most brands of screwdrivers on the market

Key Limitations
Maximum of 40 pounds of downward force that can be applied to screw Force limitation make it less ideal for self drilling screws requiring high thrust