Telescoping Handheld Automatic Screw Driver Head By Carlson Engineering Designed To Work With A Screwfeeder & Toolstand

Automatic Screwdriving and
Screwfeeding System

Site Map

1-909-599-8087


TeleSCOPING Handheld Automatic Screw Driver Head The Carlson Engineering automatic screwdriving heads are designed to work with screwfeeders. They will automate your screw driving process by automatically driving the screw into your product. The TeleSCOPING head can be setup to drive screws to torque or depth. Running screws to depth works well with wood products due to varying torque requirements. Our handheld TeleSCOPING screwdrivng head can be fitted with almost any brand of screwdriver on the market today.

Key Features
Works with almost any screwdriver High torque capacity Small size and weight Simple design Very durable Work well with self drilling screws Very narrow profile Works well for left or right handed operators

Key Limitations
Screw is not held proud with bit locked against it Push down force required by operator can be 2 to 7 pounds depending on the screw size Because the jaws are pushing against the product with light spring pressure scuffing can potentially take place Push down and lift up distance is 2 to 3 times the length of the screw