Type 4 automatic screwdriver heads are classified as any blow-fed drive head with a single-stage travel slide – opposite of the Type 1 drive heads. The jaw & bit strokes are not independent on Type 4 drive heads. Type 4 drive head slides are typically used for applications where a 2+ axis robot arm is being used to lower the screwdriver to the part, and independent jaw & bit strokes are not necessary.
Details: | |
|---|---|
Torque Capacity | 9-nm |
Max Fastener Ø | 11-mm |
Max Fastener Length | 38-mm |
Details: | |
|---|---|
Torque Capacity | 9-nm |
Max Fastener Ø | 11-mm |
Max Fastener Length | 38-mm |
Details: | |
|---|---|
Torque Capacity | 100-nm |
Max Fastener Ø | 26-mm |
Max Fastener Length | 102-mm |
Details: | |
|---|---|
Torque Capacity | 100-nm |
Max Fastener Ø | 50-mm |
Max Fastener Length | 127-mm |
Details: | |
|---|---|
Torque Capacity | 1000-nm |
Max Fastener Ø | 50-mm |
Max Fastener Length | 127-mm |
Details: | |
|---|---|
Torque Capacity | 25-nm |
Max Fastener Ø | 19-mm |
Max Fastener Length | 76-mm |
Details: | |
|---|---|
Torque Capacity | 25-nm |
Max Fastener Ø | 19-mm |
Max Fastener Length | 76-mm |
Enter your fastener & application specifications into our product configurator to learn more about the automation products that will work for your specific application.
Stay up to date on company news, industry thought leadership, new product releases, and more. Sign up now to receive direct email marketing tailored to your industry.
Carlson Engineering has been designing and manufacturing cutting edge automatic screwdriver and screw feeder systems for over 30 years.
