/
MiniMod Type 1 Drive Head

MiniMod Type 1 Drive Head

SKU: FXD-146

MiniMod Type 1 Drive Head

The MiniMod series of low-torque automatic screwdrivers are designed to seamlessly integrate into low-payload robotic arm assemblies, and can be fitted with most screwdriving tools available on the market today.
Drive head's appearance may vary depending on your application's fastener type, tool type, torque specifications, available space, and more factors. Contact sales for more information.
Drive Head Details
Torque
Torque Capacity
9-nm
Drive Head
Drive Head Type
type-1
Weight
Approx. Weight
1.8-kg
Width
Approx. Width
25-mm
Head Diameter
Max Fastener Ø
11-mm
Screw Length
Max Fastener Length
38-mm
Fastener Type
Fastener Types
screw, set-screw, nut, bolt, pin, stud, rivet
MiniMod Type 1 Drive Head

A dual-stage automatic screwdriver head that is engineered to suit your industrial screwdriving automation application.

Streamlined automatic screw assembly made simple.

Carlson Engineering automated screw driving machines are designed to work with a screwfeeder or step feeder, and assist in your assembly automation fastening process by advancing the screw or screws to your product, stopping above it, and then advancing the bit driving the screw or screws to torque or depth. Carlson automatic feed screwdriver systems can be fitted with almost any brand of screwdriver on the market today.

Size Chart

Fixtured Drive Head Size Chart

Wondering how the MiniMod Type 1 Drive Head stacks up against our other fixtured automatic drive heads?

Below is a simple diagram that visually explains representative dimensions of our different automatic drive head families. Please note that dimensions may vary from application to application, and no two applications or drive heads are exactly alike. This chart should be used as a reference guide, not an engineering tool.

MiniMod Mini Automatic Screwdriver Head Type 1 Side 2
Features

Automatic Screwdriver Head Anatomy & Features.

About the MiniMod Type 1 Drive Head automated screw assembly end effector.

Our line of high-performance, low maintenance automatic screwdrivers and screw feeder equipment consistently & effortlessly increases the efficiency of assembly automation lines, and results in lower cost of operation for automatic screwfeeding and screwdriving.

Dual-Stage Screwdriving

As a Type 1, this drive head is dual-stage device with 2 independently operating travel slides & corresponding Jaw and Bit strokes, making hard to reach areas accessible.

For Low Payload Robots

Designed with smaller applications in mind, the MiniMod Type 1 Drive Head is able to seamlessly integrate into low-payload robotic arm assemblies.

Compatibility

The MiniMod Type 1 Drive Head is intended for use with a blow-feed automatic screwfeeder and can also be configured to drive bolts, pins, rivets, set-screws, and more.

Contact Sales

Inquire about the MiniMod Type 1 Drive Head:

We will get back to you within 2 business days.

Fill out the form below to the best of your ability, and a sales representative from Carlson Engineering & Manufacturing will reach out to you within 2 business days regarding your MiniMod Type 1 Drive Head quote.
Contact Name
Please enter your first and last name.
Contact Email
What email address should we send a quote to?
Contact Phone
What's the best phone number to reach you?
Business Name
What business do you represent?
Your Message:
What would you like us to know about your application?
Types 1-6

Drive Head Type Chart

Every assembly is different. That’s why we’ve engineered adaptability into our single-spindle drive heads – so that no matter the application, we have a drive head that will work for you. Each type of drive head has different qualities which make it more suited for a particular style of fastener driving.

Type 1 Drive Head Drawing

Type 1 Drive Heads

Type 1 drive heads include a dual-stage travel slide, with two travel strokes.

Type 2 Drive Head Drawing

Type 2 Drive Heads

Primarily used for pick & place presenter applications or nut-running with a vacuum finder.

Type 3 Drive Head Drawing

Type 3 Drive Heads

Type 3 drive heads are intended for driving pre-placed screws, nut running, and bottle-capping.

Type 4 Drive Head Drawing

Type 4 Drive Heads

Type 4 drive heads have a single-stage travel slide – opposite of the Type 1 drive heads.

Type 5 Drive Head Drawing

Type 5 Drive Heads

A drive head that is configured with a vacuum bit extend option, designed to work with a blow feeder.

Type 6 Drive Head Drawing

Type 6 Drive Heads

A drive head that is configured with a magnetic bit extend option, designed to work with a blow feeder.

Feedability

Feeder Compatibility Formula:

To find out whether or not your fastener can be fed using a traditional blow-feed vibratory screw feeder, use the formula below:

Screw Diagram for measuring feedability ratio

Inquire about the MiniMod Type 1 Drive Head.

Contact Name
Please enter your first and last name.
Contact Email
What email address should we send a quote to?
Contact Phone
What's the best phone number to reach you?
Business Name
What business do you represent?
Your Message:
What would you like us to know about your application?