Drive Head Details | |
---|---|
Torque Capacity | 9-nm |
Drive Head Type | type-2 |
Approx. Weight | 1.36-kg |
Approx. Width | 25-mm |
Max Fastener Ø | 11-mm |
Max Fastener Length | 38-mm |
Fastener Types | screw, set-screw, nut, bolt, pin, stud, rivet |
Carlson Engineering automated screw driving machines are designed to work with a screwfeeder or step feeder, and assist in your assembly automation fastening process by advancing the screw or screws to your product, stopping above it, and then advancing the bit driving the screw or screws to torque or depth. Carlson automatic feed screwdriver systems can be fitted with almost any brand of screwdriver on the market today.
As a Type 2 drive head, the MiniMod Type 2 Drive Head excels at pick & place operations in which the vacuum finder tube must pick a non-magnetic screw up from a presenter location and drive it into a part.
Designed with smaller applications in mind, the MiniMod Type 2 Drive Head is able to seamlessly integrate into low-payload robotic arm assemblies.
The MiniMod Type 2 Drive Head is intended for use with an automatic screw presenter and can also be configured to drive bolts, pins, rivets, set-screws, and more.
Enter your fastener & application specifications into our product configurator to learn more about the automation products that will work for your specific application.
Stay up to date on company news, industry thought leadership, new product releases, and more. Sign up now to receive direct email marketing tailored to your industry.
Carlson Engineering has been designing and manufacturing cutting edge automatic screwdriver and screw feeder systems for over 30 years.
Every assembly is different. That’s why we’ve engineered adaptability into our single-spindle drive heads – so that no matter the application, we have a drive head that will work for you. Each type of drive head has different qualities which make it more suited for a particular style of fastener driving.
Type 1 drive heads include a dual-stage travel slide, with two travel strokes.
Primarily used for pick & place presenter applications or nut-running with a vacuum finder.
Type 3 drive heads are intended for driving pre-placed screws, nut running, and bottle-capping.
Type 4 drive heads have a single-stage travel slide – opposite of the Type 1 drive heads.
A drive head that is configured with a vacuum bit extend option, designed to work with a blow feeder.
A drive head that is configured with a magnetic bit extend option, designed to work with a blow feeder.
To find out whether or not your fastener can be fed using a traditional blow-feed vibratory screw feeder, use the formula below: