/
XMod Type 2 Drive Head

XMod Type 2 Drive Head

Categories:
Drive Head
Drive Head Type Chart
Fastener Type
Screw Feeder Ratio
SKU: FXD-171

XMod Type 2 Drive Head

A highly modular & versatile, single-stage approach to automatic screwdriving designed to pick up fasteners with a vacuum finder tube & drive them into place.
Drive head's appearance may vary depending on your application's fastener type, tool type, torque specifications, available space, and more factors. Contact sales for more information.
Drive Head Details
Torque
Torque Capacity
25-nm
Drive Head
Drive Head Type
type-2
Weight
Approx. Weight
5-kg
Width
Approx. Width
40-mm
Head Diameter
Max Fastener Ø
19-mm
Screw Length
Max Fastener Length
76-mm
Fastener Type
Fastener Types
screw, set-screw, nut, bolt, pin, stud, rivet
XMod Type 2 Drive Head

An automatic screwdriver head with a vacuum finder tube engineered to suit your industrial screwdriving automation application.

Streamlined automatic screw assembly made simple.

Carlson Engineering automated screw driving machines are designed to work with a screwfeeder or step feeder, and assist in your assembly automation fastening process by advancing the screw or screws to your product, stopping above it, and then advancing the bit driving the screw or screws to torque or depth. Carlson automatic feed screwdriver systems can be fitted with almost any brand of screwdriver on the market today.

XMod Automatic Screwdriver Head Carlson Engineering Type 2 Side 4
Features

Automatic Screwdriver Head Anatomy & Features.

About the XMod Type 2 Drive Head automated screw assembly end effector.

Our line of high-performance, low maintenance automatic screwdrivers and screw feeder equipment consistently & effortlessly increases the efficiency of assembly automation lines, and results in lower cost of operation for automatic screwfeeding and screwdriving.

For Pick & Place Applications

As a Type 2 drive head, the XMod Type 2 Drive Head excels at pick & place operations in which the vacuum finder tube must pick a non-magnetic screw up from a presenter location and drive it into a part.

A Modular Approach

Engineered with the individual needs of each different assembly, the XMod Type 2 Drive Head is a highly-modular design that can be configured in a number of ways to achieve a screwdriving goal.

Compatibility

The XMod Type 2 Drive Head is intended for use with an automatic screw presenter and can also be configured to drive bolts, pins, rivets, set-screws, and more.

Contact Sales

Inquire about the XMod Type 2 Drive Head:

We will get back to you within 2 business days.

Fill out the form below to the best of your ability, and a sales representative from Carlson Engineering & Manufacturing will reach out to you within 2 business days regarding your XMod Type 2 Drive Head quote.
Contact Name
Please enter your first and last name.
Contact Email
What email address should we send a quote to?
Contact Phone
What's the best phone number to reach you?
Business Name
What business do you represent?
Your Message:
What would you like us to know about your application?
Types 1-6

Drive Head Type Chart

Every assembly is different. That’s why we’ve engineered adaptability into our single-spindle drive heads – so that no matter the application, we have a drive head that will work for you. Each type of drive head has different qualities which make it more suited for a particular style of fastener driving.

Type 1 Drive Head Drawing

Type 1 Drive Heads

Type 1 drive heads include a dual-stage travel slide, with two travel strokes.

Type 2 Drive Head Drawing

Type 2 Drive Heads

Primarily used for pick & place presenter applications or nut-running with a vacuum finder.

Type 3 Drive Head Drawing

Type 3 Drive Heads

Type 3 drive heads are intended for driving pre-placed screws, nut running, and bottle-capping.

Type 4 Drive Head Drawing

Type 4 Drive Heads

Type 4 drive heads have a single-stage travel slide – opposite of the Type 1 drive heads.

Type 5 Drive Head Drawing

Type 5 Drive Heads

A drive head that is configured with a vacuum bit extend option, designed to work with a blow feeder.

Type 6 Drive Head Drawing

Type 6 Drive Heads

A drive head that is configured with a magnetic bit extend option, designed to work with a blow feeder.

Feedability

Feeder Compatibility Formula:

To find out whether or not your fastener can be fed using a traditional blow-feed vibratory screw feeder, use the formula below:

Screw Diagram for measuring feedability ratio

Inquire about the XMod Type 2 Drive Head.

Contact Name
Please enter your first and last name.
Contact Email
What email address should we send a quote to?
Contact Phone
What's the best phone number to reach you?
Business Name
What business do you represent?
Your Message:
What would you like us to know about your application?